Current Driver CAB Summary | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Delta Report for Previous Driver CAB v/s Current Driver CAB | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(MVT4C-A04-10/11/2016) v/s (6K6HR-A05-02/14/2017) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
----Comparison Report---- | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
↧
Latitude E7470 Windows 10 Driver Pack
↧
Dell Command | Configure
Note - If Dell Command | Configure 3.2.0 A00 is already installed on your system, uninstall Dell Command | Configure 3.2.0 A00, and then install Dell Command | Configure 3.2.0 A01.
Overview
Dell Command | Configure is a packaged software application that provides configuration capability to business client platforms.
This product consists of a Command Line Interface (CLI) and Graphical User Interface (GUI) to configure various BIOS features. Dell Command | Configure supports following Windows and Linux operating systems: Windows 7, Windows 8, Windows 8.1, and Windows 10, Windows Pre-installation Environment (Windows PE), Red Hat Enterprise Linux 6, Red Hat Enterprise Linux 7, and Ubuntu Desktop 16.04.
This is the 3.2 version of Dell Command | Configure.
Downloads
- Windows download (Released - 01/31/2017) Error Codes
- Linux downloads (Released - 02/02/2017)
- RHEL6 64 bit
- RHEL7 64 bit
- Ubuntu Desktop 16.04 64 bit
- Documentation
Fixes in the Release
The following fixes are made for 3.2.0 A00 only.
- Removed dependency on MSVCR110.dll and MSVCP110.dll in 32-bit application.
- Missing HAPI driver libraries issue for CLI alone installation has been resolved.
- Error codes are retained same as 3.1 release.
New in the Release
- Support for new platforms.
- Support for SMBIOS 3.0
- Updated the default installation path for Linux (RHEL and Ubuntu) as /opt/dell/dcc.
- Support for following new BIOS features/attributes:
- Determining if BIOS should attempt to boot from the legacy boot list when the UEFI boot list fails (--attemptlegacyboot).
- Configuring the Active State Power Management (ASPM) level (--aspm).
- Configuring the automatic BIOS recovery without any user interaction if BIOS corruption is detected (--biosautorecovery).
- Configuring the BIOS connect feature (--biosconnect).
- Configuring the state of the available BiosConnect boot paths (--biosconnectactivation).
- Allowing or restricting downgrading of the system BIOS (--biosdowngrade).
- Configuring the BIOS integrity check during the booting process (--biosintegritycheck).
- Allowing or restricting the BIOS event log to be cleared on the next boot (--bioslogclear).
- Configuring the visibility of BIOS settings (--biossetupadvmode).
- Configuring the time-out value for the keyboard backlight when an AC adapter is plugged into the system (--brightnessac).
- Configuring the panel brightness to be used when the system is using battery power only (--brightnessbattery).
- Configuring the Reliability Availability Serviceability (RSA) support on CPUs (--cpursa).
- Configures the CPU snoop mode (--cpusnoop).
- Configuring the platform external displays (--dgpuexterndisplay).
- Configuring Configures the dock battery charge mode (--dockbattchrgcfg).
- Allowing or restricting to use the docking station in the absence of AC power while the battery is charged for more than specified percentage (--docksupportonbattery).
- Configuring the fan speed control if the fan speed is set to Auto using fanspeed attribute (--fanspeedctrllevel).
- Configuring whether to clear the fault tolerant memory log during the next boot (--faulttolerantmemlogclear).
- Configuring the full screen logo that appears during BIOS POST (--fullscreenlogo)
- Configuring GPS WWAN Radio (--gpsonwwanradio).
- Configuring System Isochronous mode (--isochronous).
- Configuring the time-out value for the keyboard backlight when an AC adapter is plugged into the system (--kbdbacklighttimeoutac).
- Configuring the time-out value for the keyboard backlight when the system is running only on battery power (--kbdbacklighttimeoutbatt).
- Configuring lid switch functions (--lidswitch).
- Configuring the liquid cooler 1, and the liquid cooler 2 (--liquidcooler1, and --liquidcooler2).
- Configuring M2 PCIE SSD 0 and M2 PCIE SSD 1 (--m2pciessd0, and --m2pciessd1).
- Configuring the master password settings (--masterpwdlockout).
- Configuring the time limit value of the memory fault tolerance (--memfaulttoltimelmt).
- Configuring Reliability Availability Serviceability (RSA) support on memory modules (--memoryrsa).
- Configuring the memory performance monitor feature (--memperformancemonitor).
- Configuring the Reliability Availability Serviceability (RSA) support on PCIe devices (--pciersa).
- Allows or restricts the power event log to be cleared on the next boot (--powerlogclear).
- Configuring the Stealth Mode control of the Intel 8260 card (--poweroffintel8260stealthmode).
- Configuring the Dell recovery tool (--recoverytool).
- Allowing or restricting the system to boot from SD card (--sdcardboot).
- Configuring the read-only mode for SD card (--sdcardreadonly).
- Configures Secure Guard Extensions (SGX) feature (--secureguardext).
- Indicating that the power button has been pressed during POST (--signoflifeindication).
- Determining which sleep mode to be used by the operating system (--sleepmode).
- Configuring the boot flow for SupportAssist OS recovery tool in the event of certain system errors (--supportassistosrcvry).
- Deleting the service OS non-volatile region (--svcosclear).
- Allows or restricts the thermal event log to be cleared on the next boot (--thermallogclear).
- Configuring the thunderbolt controller in the system (--thunderbolt).
- Configuring the thunderbolt security level (--thunderboltsecuritylevel).
- Configuring the maximum power for type-C connector (--typecbtryovrldprotection).
- Determining whether the system should prompt the user to enter the Admin password, if set, while booting from a UEFI boot path from the F12 Boot Menu (--uefibootpathsecurity).
- Configuring the provisioning of Intel AMT from a USB storage device (--usbprovision).
- Configuring the USB wake from s4 power state of the system (--usbwakefroms4)
- Support for additional possible values for the following BIOS features/attributes:
- --cpucore
- --speaker
- --primaryvideodeviceslot
- --processorcorecount
- Withdrawal of support for the following BIOS features/attributes:
- --clearsel
- --speakervol
Known Issues
Issue: The exported SCE (.sh) file does not run on Linux, and displays the error message that "Improper version of OS used".
Description: The SCE (.sh) file exported using Dell Command | Configure GUI does not run on the systems running the following operating systems: RHEL 6.8, RHEL 7.3 & Ubuntu Desktop 14.04.
Resolution: Add the OS version of the target system by manually editing the exported .sh file.
Examples:
For the systems running Ubuntu Desktop 14.04, edit the .sh file as highlighted below.
if [ -f /etc/lsb-release ]; then export OS=`lsb_release -r | sed s/[^0-9]//g`; if [(( $OS == 1504 )) || (( $OS == 1604 )) || (( $OS == 1404 ))]; then CCTKPATH=/opt/dell/dcc; |
For the systems runningRHEL 7.3, edit the .sh file by as highlighted below.
elif [ -f /etc/redhat-release ]; then export OS=`cat /etc/redhat-release | sed s/[^0-9]//g`; if [(( $OS == 56 )) || (( $OS == 60 )) || (( $OS == 70 )) || (( $OS == 73 ))]; then CCTKPATH=/opt/dell/dcc; |
Previous Releases
Dell Command | Configure 3.1.2
- Windows download
- Linux downloads
- Documentation
- Windows download
- Linux downloads
- Documentation
Dell Command | Configure 3.0
- Windows download
- Linux downloads
- Documentation
Video
1. Activating the TPM with Dell Command | Configure
(Please visit the site to view this video)
2. Setting the BIOS defaults using Dell Command | Configure
(Please visit the site to view this video)
White Papers
will be posted soon.....
↧
↧
Precision 5520 Windows 10 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
Latitude E5470 Windows 10 Driver Pack
Current Driver CAB Summary | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Delta Report for Previous Driver CAB v/s Current Driver CAB | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(C659Y-A05-10/11/2016) v/s (FGRPN-A06-02/14/2017) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
----Comparison Report---- | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
↧
Dell Precision Optimizer 4.0 Guide for IT Administrators
IT Administrator guide for Dell Precision Optimizer 4.0
↧
↧
Remote configuration of Dell Precision Optimizer with Microsoft Configuration Manager (SCCM)
Many customers want to pre-configure Dell Precision Optimizer with a management platform like Microsoft Configuration Manager (SCCM). Below is documentation and a video on how to accomplish this. The specific profiles that are available are details below as well.
Download the IT Administrator Guide -> Dell Precision Optimizer 4.0 - A Guide for IT Administrators
Demo video of DPO management through SCCM - http://delltechcenter.adobeconnect.com/p2kktfuobsf/
| Profile Name | GUID |
| NX by Siemens | {11FD776F-94F3-4471-9CE4-118ECB71DE55} |
| SolidWorks by Dassault Systèmes | {2673B7BA-4FD6-4626-8251-56F0644765BB} |
| Illustrator by Adobe | {268C0BF4-BD15-48F5-96EE-FF790B376211} |
| Petrel by Schlumberger | {2788CCDF-B747-4B3C-8D67-053BFBFD8993} |
| Microstation by Bentley | {2BF4DDF8-EC6D-409F-B116-14F69CC3FD04} |
| After Effects CS / CC by Adobe | {2F066600-FA52-4F57-890D-2621D39B0BE9} |
| MotionBuilder by Autodesk | {37538CED-7A84-4DC8-ACBC-F1649C3D3E9C} |
| Premiere Pro CS / CC by Adobe | {385A1859-8397-44CD-B146-51EACD826F8A} |
| CATIA by Dassault Systèmes | {387EA83C-8FCF-46FF-8FD0-45A7DA5623F5} |
| Creo by PTC | {45FD78B6-CB78-4398-A19B-9BE1BE24FC4E} |
| 3dsmax Computational by Autodesk | {6AC89E78-5FDF-420C-AAFA-10A8353DA464} |
| MudBox by Autodesk | {6FF7F7A1-D807-4945-B84A-FB93ADD6B310} |
| AutoCAD by Autodesk | {7E08698E-5DF7-48D9-B975-4BE87A4CD8FB} |
| Fluent by ANSYS | {896F720A-20FA-4741-BEE6-74C7926CB06E} |
| Maya Rendering Model by Autodesk | {96F953C2-7DAF-4A64-8437-C1DE3D3ED950} |
| Revit by Autodesk | {B1BD4D20-7E51-4118-8BD6-0746108E391F} |
| Inventor by Autodesk | {B7F51224-03F0-4059-B3D9-0D9D7588266A} |
| 3dsmax Interactive by Autodesk | {C5721BA4-00A9-46F4-85E1-9F38E3BF5A04} |
| Media Encoder CS / CC by Adobe | {DC6300F3-7219-43B7-AC35-70315C79256C} |
| Photoshop CS / CC by Adobe | {E96256E1-483B-4814-AE66-3B412FBD0BE3} |
| SpeedGrade by Adobe | {ED0EE5E9-5D09-44DD-9A21-0D96D2CD12A0} |
| Media Composer by Avid | {FBFDA47F-3CCC-4C7A-A75D-DA28A561AEC1} |
| Workbench by ANSYS | {FEF69512-7D9A-4BA5-902B-790EC5F94673} |
| Cinema 4D Interactive by Maxon | {EC9A8DA3-736D-4ABE-A9B8-D9E95C9C0FC6} |
| Cinema 4D Computational by Maxon | {955AF9D0-0F93-40B9-BB63-994E7B840D90} |
| DecisionSpace DSG1 by Landmark | {63B60BBF-FBB2-4F70-8639-5972964FF64F} |
| Sonar Platinum by Cakewalk | {DA84F437-7C64-434D-8AC6-581B4C4D7F1D} |
↧
Dell Command | Power Manager
Dell Command | Power Manager replaces Dell Power Manager and is a part of the Dell Client Command Suite. It allows end users to maximize their battery life by configuring how the battery should be maintained based on their personal preferences. IT Admins can enforce specific settings or limit features that are available in Dell Command | Power Manager through the included Group Policy snap-in.
Download Dell Command | Power Manager 2.2 (released February 2017)
Enhancements
- Added indication for Non-Dell battery
- Added USB type-C alerts
- Updated Group Policy Templates
↧
Dell Command | Configure
Note - If Dell Command | Configure 3.2.0 A00 is already installed on your system, uninstall Dell Command | Configure 3.2.0 A00, and then install Dell Command | Configure 3.2.0 A01.
Overview
Dell Command | Configure is a packaged software application that provides configuration capability to business client platforms.
This product consists of a Command Line Interface (CLI) and Graphical User Interface (GUI) to configure various BIOS features. Dell Command | Configure supports following Windows and Linux operating systems: Windows 7, Windows 8, Windows 8.1, and Windows 10, Windows Pre-installation Environment (Windows PE), Red Hat Enterprise Linux 6, Red Hat Enterprise Linux 7, and Ubuntu Desktop 16.04.
This is the 3.2 version of Dell Command | Configure.
Downloads
- Windows download (Released - 01/31/2017) Error Codes
- Linux downloads (Released - 02/02/2017)
- Documentation
Fixes in the Release
The following fixes are made for 3.2.0 A00 only.
- Removed dependency on MSVCR110.dll and MSVCP110.dll in 32-bit application.
- Missing HAPI driver libraries issue for CLI alone installation has been resolved.
- Error codes are retained same as 3.1 release.
New in the Release
- Support for new platforms.
- Support for SMBIOS 3.0
- Updated the default installation path for Linux (RHEL and Ubuntu) as /opt/dell/dcc.
- Support for following new BIOS features/attributes:
- Determining if BIOS should attempt to boot from the legacy boot list when the UEFI boot list fails (--attemptlegacyboot).
- Configuring the Active State Power Management (ASPM) level (--aspm).
- Configuring the automatic BIOS recovery without any user interaction if BIOS corruption is detected (--biosautorecovery).
- Configuring the BIOS connect feature (--biosconnect).
- Configuring the state of the available BiosConnect boot paths (--biosconnectactivation).
- Allowing or restricting downgrading of the system BIOS (--biosdowngrade).
- Configuring the BIOS integrity check during the booting process (--biosintegritycheck).
- Allowing or restricting the BIOS event log to be cleared on the next boot (--bioslogclear).
- Configuring the visibility of BIOS settings (--biossetupadvmode).
- Configuring the time-out value for the keyboard backlight when an AC adapter is plugged into the system (--brightnessac).
- Configuring the panel brightness to be used when the system is using battery power only (--brightnessbattery).
- Configuring the Reliability Availability Serviceability (RSA) support on CPUs (--cpursa).
- Configures the CPU snoop mode (--cpusnoop).
- Configuring the platform external displays (--dgpuexterndisplay).
- Configuring Configures the dock battery charge mode (--dockbattchrgcfg).
- Allowing or restricting to use the docking station in the absence of AC power while the battery is charged for more than specified percentage (--docksupportonbattery).
- Configuring the fan speed control if the fan speed is set to Auto using fanspeed attribute (--fanspeedctrllevel).
- Configuring whether to clear the fault tolerant memory log during the next boot (--faulttolerantmemlogclear).
- Configuring the full screen logo that appears during BIOS POST (--fullscreenlogo)
- Configuring GPS WWAN Radio (--gpsonwwanradio).
- Configuring System Isochronous mode (--isochronous).
- Configuring the time-out value for the keyboard backlight when an AC adapter is plugged into the system (--kbdbacklighttimeoutac).
- Configuring the time-out value for the keyboard backlight when the system is running only on battery power (--kbdbacklighttimeoutbatt).
- Configuring lid switch functions (--lidswitch).
- Configuring the liquid cooler 1, and the liquid cooler 2 (--liquidcooler1, and --liquidcooler2).
- Configuring M2 PCIE SSD 0 and M2 PCIE SSD 1 (--m2pciessd0, and --m2pciessd1).
- Configuring the master password settings (--masterpwdlockout).
- Configuring the time limit value of the memory fault tolerance (--memfaulttoltimelmt).
- Configuring Reliability Availability Serviceability (RSA) support on memory modules (--memoryrsa).
- Configuring the memory performance monitor feature (--memperformancemonitor).
- Configuring the Reliability Availability Serviceability (RSA) support on PCIe devices (--pciersa).
- Allows or restricts the power event log to be cleared on the next boot (--powerlogclear).
- Configuring the Stealth Mode control of the Intel 8260 card (--poweroffintel8260stealthmode).
- Configuring the Dell recovery tool (--recoverytool).
- Allowing or restricting the system to boot from SD card (--sdcardboot).
- Configuring the read-only mode for SD card (--sdcardreadonly).
- Configures Secure Guard Extensions (SGX) feature (--secureguardext).
- Indicating that the power button has been pressed during POST (--signoflifeindication).
- Determining which sleep mode to be used by the operating system (--sleepmode).
- Configuring the boot flow for SupportAssist OS recovery tool in the event of certain system errors (--supportassistosrcvry).
- Deleting the service OS non-volatile region (--svcosclear).
- Allows or restricts the thermal event log to be cleared on the next boot (--thermallogclear).
- Configuring the thunderbolt controller in the system (--thunderbolt).
- Configuring the thunderbolt security level (--thunderboltsecuritylevel).
- Configuring the maximum power for type-C connector (--typecbtryovrldprotection).
- Determining whether the system should prompt the user to enter the Admin password, if set, while booting from a UEFI boot path from the F12 Boot Menu (--uefibootpathsecurity).
- Configuring the provisioning of Intel AMT from a USB storage device (--usbprovision).
- Configuring the USB wake from s4 power state of the system (--usbwakefroms4)
- Support for additional possible values for the following BIOS features/attributes:
- --cpucore
- --speaker
- --primaryvideodeviceslot
- --processorcorecount
- Withdrawal of support for the following BIOS features/attributes:
- --clearsel
- --speakervol
Known Issues
Issue: The exported SCE (.sh) file does not run on Linux, and displays the error message that "Improper version of OS used".
Description: The SCE (.sh) file exported using Dell Command | Configure GUI does not run on the systems running the following operating systems: RHEL 6.8, RHEL 7.3 & Ubuntu Desktop 14.04.
Resolution: Add the OS version of the target system by manually editing the exported .sh file.
Examples:
For the systems running Ubuntu Desktop 14.04, edit the .sh file as highlighted below.
if [ -f /etc/lsb-release ]; then export OS=`lsb_release -r | sed s/[^0-9]//g`; if [(( $OS == 1504 )) || (( $OS == 1604 )) || (( $OS == 1404 ))]; then CCTKPATH=/opt/dell/dcc; |
For the systems runningRHEL 7.3, edit the .sh file by as highlighted below.
elif [ -f /etc/redhat-release ]; then export OS=`cat /etc/redhat-release | sed s/[^0-9]//g`; if [(( $OS == 56 )) || (( $OS == 60 )) || (( $OS == 70 )) || (( $OS == 73 ))]; then CCTKPATH=/opt/dell/dcc; |
Previous Releases
Dell Command | Configure 3.1.2
- Windows download
- Linux downloads
- Documentation
- Windows download
- Linux downloads
- Documentation
Dell Command | Configure 3.0
- Windows download
- Linux downloads
- Documentation
Video
1. Activating the TPM with Dell Command | Configure
(Please visit the site to view this video)
2. Setting the BIOS defaults using Dell Command | Configure
(Please visit the site to view this video)
White Papers
will be posted soon.....
↧
Latitude 5580 Windows 10 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
↧
Dell Client Command Suite Webcast
Join our weekly webcast to discuss the Dell Client Command Suite and other systems management topics of interest to Dell customers.
When: Thursdays at 10am US Central Time (see schedule below for details) Download a calendar invite (.ics) here
Where: http://delltechcenter.adobeconnect.com/command/
Upcoming Webcast Topics
| Date | Topic |
| March 16th, 2017 | Its a Surprise! |
| March 23rd, 2017 | No Webcast today - Please review a recording below |
| March 30th, 2017 | TBD |
Previously Recorded Webcasts
| Date | Topic (Click the link below to view the recording) |
| March 9th, 2017 | Dell Client Command Suite Overview |
| February 23rd, 2017 | Open Discussion |
| February 16th, 2017 | Driver Management Strategies |
| February 2nd, 2017 | Dell Client Command Suite Overview |
| January 12th, 2017 | Managing UEFI settings for Windows 10 |
| January 5th, 2017 | Command Suite Overview |
| December 8th, 2016 | OS Deployment Basics |
| December 1st, 2016 | Command Suite Overview |
| November 17th, 2016 | Installation Demo - Part 2 |
| November 10th, 2016 | Installation Demo - SCCM integration |
| November 3rd, 2016 | Command Suite Overview |
| October 27th, 2016 | BIOS Configuration Deep Dive |
| October 20th, 2016 | Command Suite Overview |
| October 13th, 2016 | vPro Discussion |
| September 29th, 2016 | Open Discussion |
| September 22nd, 2016 | Dell Client Command Suite Overview and Demo |
| September 15th, 2016 | Dell Command | Update and Dell Command | Power Manager - Deep Dive |
| September 8th, 2016 | Dell Client Command Suite Demo |
| September 1st, 2016 | Dell Client Command Suite Demo and Discussion |
↧
Latitude 5289 Windows 10 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
Latitude 5285 Windows 10 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
Latitude 3480 Windows 7 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
↧
Latitude 3480 Windows 8.1 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
Latitude 3480 Windows 10 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
Latitude 3580 Windows 7 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
Latitude 3580 Windows 8.1 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
↧
Latitude 3580 Windows 10 Driver Pack
Current Driver CAB Summary | ||||||||||||||
| ||||||||||||||
This is the initial Driver Pack release. A delta report will be available with the next release | ||||||||||||||
↧
Latitude 3570 Windows 7 Driver Pack
Current Driver CAB Summary | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Delta Report for Previous Driver CAB v/s Current Driver CAB | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(XVDW2-A03-10/11/2016) v/s (3P0DC-A04-02/28/2017) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
----Comparison Report---- | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
↧
Dell Command | Deploy - Driver Packs for Enterprise Client OS Deployment
Note: There is known issue for Windows 10 Driver Import in SCCM 2012 SP2\R2SP1. To resolve this, you must apply CU1 KB: KB3074857
Below you will find Driver CABs for Dell Enterprise class systems (Latitude, Optiplex, Precision) to be used to simplify OS deployments on those systems with deployment tools like Microsoft System Center Configuration Manager (ConfigMgr/SCCM) or Microsoft Deployment Toolkit (MDT).
System CABs for Venue, XPS, Latitude, Optiplex, and Precision Workstations - are designed for deployment to a single model and are developed and supported by Dell
WinPE CABs are designed to provide required drivers for WinPE to boot a Dell Latitude, Optiplex, or Precision Workstation for the purpose of OS Deployment.
Family Driver Packs are designed for deployment to multiple models and are developed and supported by the Dell Configuration Services.
The links below will provide additional details on the CABs and a link to download.
If you are new to Dell Driver CABs, please check out the .CAB File Documentation and Walk-Throughs or the Win 7 Deployment video
You can also access the System CABs from http://support.dell.com -- Select Drivers & Downloads, and enter the system model. You will find the supported driver .cab file in the "Systems Management" section under "Driver Pack".
Automate your driver management by leveraging the Driver Pack Catalog.
Driver CAB's are grouped by product family and are listed with the most recent products at the top.
The Driver CABs are updated based on a release schedule which updates newer systems more frequently. New CAB download pages will include Delta Reports on what has changed in the CAB.
If you still have questions, check out the Deployment FAQ page or our discussion forums.
NOTE: Windows 8 CABs for older systems will be reviewed periodically to see if there are new drivers required. It is currently expected that Windows 8 will contain the drivers required for those systems.
WinPE - CAB Availability (follow the links for CAB details and to download)
| WinPE version | Current CAB |
| WinPE 10 | A04 (01/10/2017) |
| WinPE 5.x | A09 (02/14/2017) |
| WinPE 4.x | A06 (06/02/2015) |
| WinPE 3.x | A21 (02/14/2017) |
| WinPE 2.x | A00 (05/26/2009) |
XPS Systems - CAB Availability (follow the links for CAB details and to download)
| System | Windows 10 System CAB | Windows 8.1 System CAB | Windows 8 System CAB | Windows 7 System CAB |
| XPS 11 (9P33) | A00 (08/19/2015) | A00 (11/14/2013) | ||
| XPS 12 (9250) | A07 (02/14/2017) | |||
| XPS 12 (9Q33) | A00 (10/23/2013) | A00 (07/19/2013) | ||
| XPS 12 (L221x and 9Q23) | A01 (03/38/2016) | A01 (12/10/2012) | ||
| XPS 13 (9365) | A01 (02-14-2017) | |||
| XPS 13 (9360) | A01 (01/10/2017) | |||
| XPS 13 (9350) | A06 (01/10/2017) | A04 (07/26/2016) | A05 (01/10/2017) | |
| XPS 13 (9343) | A03 (11/08/2016) | A04 (02/09/2016) | A05 (11/08/2016) | |
| XPS 13 (9333) | A01 (03/08/2016) | A00 (11/22/2013) | A00 (11/22/2013) | |
| XPS 13 (L321x and L322x) | A01 (03/08/2016) | A02 (07/31/2013) | A04 (08/29/2013) | |
| XPS 14 (L421x) | A01 (03/08/2016) | A01 (02/25/2013) | A01 (02/25/2013) | |
| XPS 15 (9560) | A00 (01-17-2017) | |||
| XPS 15 (9550) | A07 (01/10/2017) | A06 (09/13/2016) | ||
| XPS 15 (9530) | A01 (01/12/2016) | A00 (10/23/2013) | ||
| XPS 15 (L521x) | A01 (03/08/2016) | A01 (02/25/2013) | A03 (02/25/2013) |
Internet Of Things - CAB Availability (follow the links for CAB details and to download)
| System | Windows 10 System CAB | Windows 7 System CAB |
| Embedded Box PC 3000 | A00 (02/14/2017) | A02 (10/11/2016) |
| Embedded Box PC 5000 | A00 (02/14/2017) | A03 (02/14/2017) |
Venue Systems - CAB Availability (follow the links for CAB details and to download)
NOTE: Detail on deploying Venue tablets can be found HERE
| System | Windows 10 System CAB | Windows 8.1 System CAB |
| Venue 11 Pro (7140) | A04 (10/11/2016) | A03 (01/12/2016) |
| Venue 11 Pro (7130 MS/ 7130 vPro/7139 vPro) | A03 (11/08/2016) | A07 (02/09/2016) |
| Venue 11 Pro (5130) | A02 (06/14/2016) | A08 (02/09/2016) |
| Venue 10 Pro (5056) | A05 (10/11/2016) | A03 (06/14/2016) |
| Venue 8 Pro (5855) | A06 (02/14/2017) | A03 (06/14/2016) |
| Venue 8 Pro (5830) | A02 (06/14/2016) | A07 (02/09/2016) |
Latitude Systems - CAB Availability (follow the links for CAB details and to download)
Optiplex Systems - CAB Availability (follow the links for CAB details and to download)
Precision Systems - CAB Availability (follow the links for CAB details and to download)
Family Driver Pack Availability.
Notice: The Dell Family Packs have moved here.
↧